Whirlpool Refrigerator Water Filter

Model #: 10383251 , Amazon’s Choice for best value, 4.0 out of 5 stars with over 1,800 reviews.

EveryDrop Ice & Water Refrigerator Water Filter 1 by Whirlpool
A new line of whirlpool refrigerator water filter was introduced in 2015. EveryDrop Water Filters are certified to greatly reduce a wide range of contaminants.

EveryDrop water filters, numbered 1 through 8 are designed to fit various models of Whirlpool, Maytag, Amana, KitchenAid, and Jenn-Air refrigerators.  Each filter is designated a number depending on its capability and the model fridge it fits.  Filter models vary in the number and quantity of contaminants reduced.

Filters #1 through #4 are certified to reduce the most contaminants.

 

EveryDrop1 Ice & Water, Whirlpool Refrigerator Water Filter Spec’s
Item Weight: 7.2 ounces
Product Dimensions: 2.5 x 2.5 x 8.7 inches
Item model number: 10383251
Color: Purple
Item Package Quantity: 1 Water Filter
Service Flow Rate: 0.50 gpm @ 60 psi (1.89 lpm @ 414 kPa)
NSF Certification: 41, 53, 401
CSA Certification: 483.1

This is a mechanical and chemical reduction filter that’s used in side-by-side, top freezer and bottom freezer refrigerators which accept EveryDrop Filter 1.

EveryDrop Ice & Water Refrigerator Water Filter 1 by Whirlpool

Stages of Filtration:

Stage 1:  Particle Filtration – Helps block larger contaminants.
Stage 2:  Micro-Filtration – Helps capture medium-sized contaminants.
Stage 3:  Absorption Filtration – Helps absorb microscopic contaminants.

Whirlpool EveryDrop Filters are Certified Effective:

When shopping for a filter, be sure to only consider filters certified by NSF International. This independent organization certifies filters against three contaminant categories: 1). appearance and taste, 2). health concerns, and 3). New or emerging contaminants.

While some filters may qualify for one or two of the categories, EveryDrop® Filters 1-5 are certified for all three.

This Whirlpool filter has been tested according to NSF/ANSI Standards 42, 53, 401 and CSA 483.1 for the reduction of the 28 contaminants listed in the Performance Data Sheet, including lead, pesticides, pharmaceuticals, mercury, chlorine and waterborne parasites.

NSF/ANSI 42 Drinking Water Treatment Units, Aesthetic Effects

This standard covers point-of-use (POU) and point-of-entry (POE) systems designed to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates Class I) that may be present in public or private drinking water.

NSF 53 Protects Against:

  • Lead & Other Heavy Metals
  • Asbestos
  • Industrial Chemicals

NSF 401 Protects Against:

  • Pesticides
  • Herbicides
  • Pharmaceuticals

How to Install EveryDrop Filter.

CSA B483.1 was developed by the Canadian Standards Association developed this standard for Drinking Water Treatment Systems.  Published in 2007, this standard references the NSF/ANSI DWTU Standards to meet plumbing, mechanical, and electrical requirements for drinking water treatment components and complete systems. Products under this scope include Point of Use (POU) and Point of Entry (POE) plumbed systems and non-plumbed systems.

The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42, 53, 401 and CSA 483.1

Certified by NSF International to remove 99% of lead at PH level 6.5. Reduction may vary based on your water’s PH level. Contaminants reduced by this water filter are not necessarily in all users’ water.

It should be noted that:  Contaminants reduced by this water filter are not necessarily in all users’ water.

How to Install EveryDrop Filter in Base Grill.

Filter Capacity and Recommended Replacement Schedule:

The general capacity for one filter is about 200 U.S. gallons (757 liters) or 6-months time, whichever comes first.  Filter life depends on how much you use it and the quality of the incoming water.  The flow rate is 0.5 gpm (1.89 lpm).

It’s recommended that you change your Whirlpool refrigerator water filter every six months to maintain clean and fresh tasting water.

 

My Thoughts on the EveryDrop1 Ice & Water, Whirlpool Refrigerator Water Filter:

Whirlpool has made the effort to have independent and thorough testing conducted on their filters.  This gives me confidence of the effectiveness of their filters.  It’s highly rated by many verified customers.

Some consumers will use a Total Dissolved Solids (TDS) tester to determine water quality.  A TDS meter measures mineral content in the water in parts-per-million (PPM).  This filter is not meant to remove minerals such as calcium, magnesium, potassium, sodium, which are detectable in TDS meters.  Many people consider these electrolytes as desirable as they help make the water taste better and are essential for many processes in the body.  A TDS meter cannot accurately determine water quality alone.  It has no ability to test for a wide range of contaminants.

Whirlpool says that it’s important to verify that you’re ordering the proper filter for your fridge. Go to Whirlpool’s website, put in your model number, and it will tell which filters will fit your refrigerator.

If you need help in locating your refrigerator model number, visit https://everydropwater.com/Search/Locate.


On March 24th, 2019, Whirlpool won a lawsuit against FiltersFast, LLC for violating several of Whirlpools trademarks.  FiltersFast were deceiving customers by using images of genuine Whirlpool products to sell third-party, non-genuine water filters.  The filters sold didn’t meet the contaminant-removing certifications that genuine Whirlpool filters meet, thereby tarnishing the reputation that Whirlpool has worked hard to gain.  The jury awarded Whirlpool $5.8 million as compensation for damages.  This is also a victory for consumers as well.

Many dissatisfied customers were not impressed with its performance.  They sighted poor taste, not fitting correctly, water hammering, and short filter life.  As per several reviews, something may have changed in the dimensions of the product that is causing it not to seal correctly, leak or stop flowing.  Either that, or the product being sold is not a genuine Whirlpool filter.

 

Pros:

  • Fully certified filter.
  • Superior contaminant reduction
  • Produces clean, fresh tasting water
  • Certified to reduce 99% of lead

Cons:

  • Pricier than other water filters
  • Does not remove fluoride
  • Sizable number of dissatisfied customers

 

Conclusion:

Your refrigerator water filter has an important role in ensuring you and your family have clean, fresh-tasting water whenever it’s needed.   I’m impressed with Whirlpool’s efforts in getting their filter fully certified, but I have some reservations after reading so many negative comments from customers, although, the majority of reviews were highly positive.

Read some reviews for yourself and the filters spec’s at Amazon, visit EveryDrop1 by Whirlpool.

See all Whirlpool refrigerator water filters at Amazon.

 


 

Whirlpool Corporation is the world’s leading major home appliance company, selling more than 70 million products every year with about $21 billion in annual sales. As of 2018, they had 92,000 employees and 65 manufacturing and technology research centers.

EveryDrop® refrigerator filters are the only filters approved by Whirlpool®, KitchenAid®, Maytag®, JennAir® and Amana® brands for use in their refrigerators*.